Mechanical part cleaning process

Solvent systems complete the cleaning process in a closed cabin cleaning, cleaning described above one or more washing basket for processing. Cleaning process starts, cleaning the door lock will be closed, first the cleaning spray will last for 1 minute, after a heated solvent (according to the different kinds of solvents and different kinds of dirt, temperatures of 45 ° c to 80 ° c), directly through the high pressure nozzle spray parts. After the first spray the solvent content of pollutants in 90%, these solvents are then transported to the distillation unit in the system, all of these solvents will be recycled for sustainable use of liquid cleaning solvent.

In the meantime, a second spray is the use of solvents at room temperature, the program lasts 2 minutes and is accompanied by a large number of solvents (cleaning would have been some or all wet and soaked in a solvent through the heat difference with a combination of mechanical action adds to the remainder of cleaning pollutants from and the ability to split). When heated, these solvents will be used again in the next cleaning cleaning process.

In some cases, attached to the complex cleaning pollutants is difficult to remove, then again the cleaning spray may be necessary, the time can be of varying lengths. If necessary, can also be supported by ultrasound, but it must be calibrated ultrasonic cleaning applications the optimal frequency and intensity. In the final stage of cleaning process needed to prepare for the next dry, and in most cases is the direct gasification on components in the cleaning tank solvent mist. These solvents fogs condensed in any residual contaminants in parts to be removed, and, in the meantime, solvents, steam fog heating parts, so as to prepare themselves for the next phase of the drying.

Send your message to us:

INQUIRY NOW
  • * CAPTCHA: Please select the Cup


Post time: Jun-21-2016